Etc Eos v1.3 Manual do Utilizador descarregar pdf (Página 315)

B Multi-console and Synchronized Backup 301

Synchronized Backup

Once you have changed settings to facilitate a multi-console system on the network, you may

activate synchronized backup to ensure show data security.

Eos synchronized backup is designed so that during normal operation the primary (master) console

controls the lighting system and any console configured as backup or client synchronize with the

primary. The following activities will synchronize between consoles when operating in a backup

system:

• playback

• record operations

• manually set data

• show file/data

Only Eos consoles or RPUs can function as a master or backup.

Setting up Synchronized Backup

Before backup is possible, you must have at least two Eos devices (Consoles or RPUs only)

connected to the network. One must be assigned as primary. To set up a synchronized backup

environment you must also assign an Eos device as a backup.

To assign a backup to a primary:

Step 1: Exit the Eos environment (Browser>File>Exit Eos) on the console you wish to act

as the backup. This will send you to the ECU welcome screen.

Step 2: Touch or click on the {Backup} button in the welcome screen. The console will then

startup the Eos software, this time in backup mode. Eos will try to connect to a master

console. The CIA will say “Waiting for Primary. One moment please...”.

Step 3: If the backup doesn’t connect after a few moments, press the {Troubleshoot}

touchbutton in the CIA. This will open the network configure screen in the CIA.

Step 4: Select a master console from the list on the right. If no masters are available in the list,

a master console is not connected to the network.

Step 5: Press {Change Master}. The backup Eos will synchronize with the master.

1 2 ... 310 311 312 313 314 315 316 317 318 319 320 ... 355 356

Sem comentários

Etc Eos v1.3 Manual do Utilizador Página 315