Etc SmartFade v3.0.1 Manual do Utilizador descarregar pdf (Página 79)

A 73

Appendix A

Software Update

This appendix contains the instructions for updating the software in your SmartFade

console. There are two ways of updating the software.

• Using the SD card

• Connecting with USB to a PC

Software can be downloaded from the ETC Web site: www.etcconnect.com

Please make sure to download the correct software for your console - SmartFade and

SmartFadeML use different software.

To verify the version that your console is running, See “Software Version” on page 25.

CAUTION:

Make sure to back up any show data you want to keep to the SD card before

proceeding with a software upgrade.

CAUTION:

Only standard SD Memory cards or connection to a PC via USB may be used for

updating the software on a SmartFade console. Software update is not possible

using an SDHC Memory card.

Update the Software

SD Card Update

If you are using an SD card for the very first time - make sure it is formatted correctly

(FAT16), or it will not function with SmartFade. See “Format SD Memory Card” on page 7.

Step 1: Obtain the software update file SMRTFADE.SRC from the download section of

the ETC Web site: www.etcconnect.com

Step 2: Copy the SMRTFADE.SRC file to the root directory of the SD card. DO NOT

RENAME THE FILE!

Step 3: Start the console in test mode. This is done by holding down the MENU button

and pressing once on ON.

The unit will enter self-test mode. Press MENU for each of the tests until the

memory test has completed. At the end of the memory test the display will

prompt:

Firmware Upgrade

Are you sure? [No]

Step 4: Insert the SD card into the console.

Step 5: Turn the encoder to select YES and press MENU. The update will start and the

console will boot into the new updated software after the process is complete.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84

Sem comentários

Etc SmartFade v3.0.1 Manual do Utilizador Página 79