Etc Source Four HID Manual do Utilizador descarregar pdf

Source Four™ HID • 1

Source Four

™

HID

Lamp type and general information:

Do not use lamps other than the following lamp type in Source Four HID ﬁxtures.

Use of lamps other

than speciﬁed below will void UL/cUL safety compliance and your warranty

•

Source Four HID is suitable for damp locations

•

Can be canopy mounted

•

No recessed mounting

Caution!

Source Four HID is

NOT

dimmable. Dimming will damage ballast and void warranty.

Ballast information

Caution!

The Source Four HID

cannot

be dimmed.

•

Acceptable voltage is 120V (+/- 10%) 50/60HZ

only

•

Operating current of 1.5 Amps

•

Inrush current of <14 Amps

•

Room ambient temperature should not exceed 104ºF (40ºC)

•

Lamp ignition voltage is 4.5Kv, non-hot restrike.

•

Ballast case temperature should not exceed 167ºF (75ºC)

•

The ballast is attached to the Source Four yoke by two screws, non-remotable.

Lamp Type Manufacturing Codes Watts Base Bulb LCL Ave.

Hrs.

Initial

lumens

Color

temp

Ceramic Metal Halide

CDM-T 150W/830 150 G12 T6 56mm 9000 14000 3000˚K

CDM-T 150W/942 150 G12 T6 56mm 9000 12700 4000˚K

MD150T6/U/G12/830 150 G12 T6 56mm 9000 14000 3000˚K

MBI150/T/30 150 G12 T7 57mm 6000 11500 3000˚K

MBI150/T/40 150 G12 T7 57mm 6000 11250 4000˚K

Table 1:

HID lamp reference

Beam focus knob

Lens tube

Shutters

Barrel

Pattern holder slot

Retainer bolt

Drop-in iris

Retaining clip

Color frame

Color frame holder

Reﬂector housing

Yoke locking knob

Lamp housing

Ballast

Barrel rotation knob

Yo ke

1 2 3 4 5 6 7 8

Resumo do Conteúdo

Página 1 - Source Four

Source Four™ HID • 1 Source Four ™ HID Lamp type and general information: Do not use lamps other than the following lamp type in Source Four HID

Página 2 - Focusing the beam

2 • Source Four™ HID Installing or replacing the lamp A lamp must be installed before you use the ﬁxture. Note: Verify that the lamp you intend

Página 3 - Shaping the beam

Source Four™ HID • 3 Color frame retaining clip The color frame holder is equipped with a spring-loaded retaining clip that prevents color frames

Página 4 - 4 • Source Four™ HID

4 • Source Four™ HID Rotating the barrel assembly 1. Loosen the barrel rotation knob directly behind the shutters on the underside of the reﬂector

Página 5 - Lens locations

Source Four™ HID • 5 Cleaning ETC offers the following recommendations when cleaning and inspecting lenses and reﬂectors: Do not use glass or w

Página 6 - Cleaning the reﬂector

6 • Source Four™ HIDCleaning the reﬂectorTo quickly clean the reﬂector, remove the lens tube and clean the dust from the reﬂector with a blast of o

Página 7 - Source Four™ HID • 7

Source Four™ HID • 7

Página 8 - Electronic Theatre Controls

Electronic Theatre ControlsNorth America 3030 Laura Lane • Middleton, Wisconsin 53562 • USA • Tel: (+1) 608 831 4116 • Fax: (+1) 608 836 1736Europe

Comentários a estes Manuais

Sem comentários

Etc Source Four HID Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Iluminação Etc Source Four HID. ETC Source Four HID User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Iluminação Etc Source Four HID