ETC Source Four LED Series Manual do Utilizador descarregar pdf (Página 32)

27 Source Four LED Profile v1.4.0 User Manual

Power and Data Cabling Requirements

Power

The Desire series fixture operates on AC power, 100 to 240VAC/50-60Hz. The fixture must

be connected to a non-dimmable power source in order to avoid damage to its internal

power supply and other electrical components.

Data

The Desire series fixtures operate on a DMX control signal or as standalone fixtures. The

fixture is supplied with a 5-pin XLR DMX input connector and a 5-pin DMX Thru connector.

DMX cables should be acceptable for DMX data transmission (not microphone cable) and

should follow the standard pinout. The optional secondary data pair is not used by the

Desire series fixtures. The maximum DMX data run from any DMX source to the last fixture

in a chain is 1000 feet (300m). Desire series fixtures are self-terminated.

See DMX Profile, page 29 for additional information on DMX addressing of Source Four

LED series fixtures.

CAUTION:

The fixture must be connected to a non-dimmable power source in order to avoid

damage to its internal power supply and other electrical components. Dimming will

damage the fixture and void the warranty.

DMX512 pinout for five-pin XLR female

1 Common (Shield)

2 Data –

3 Data +

4 not connected

5 not connected

Push

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 95 96

Sem comentários

ETC Source Four LED Series Manual do Utilizador Página 32