Etc Desire Series v1.6.0 User Manual Manual do Utilizador

D22, D40, D40XT, D60User Manualv1.6Rev AThe Desire series of fixtures are intended for professional use only. Read entire User Manual before using equ

4 Desire Series v1.6.0 User ManualDocument ConventionsNoticesThroughout this manual, the following are used to alert you to notes and safety notices.N

Corporate Headquarters  3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA  Tel +608 831 4116  Fax +608 836 1736London,

Introduction 5SafetyThe Desire series fixtures are intended for professional use only. Read entire User Manual before using equipment.WARNING:Note the

6 Desire Series v1.6.0 User ManualContactsIf you have questions about your Desire series fixture that are not answered in this manual, please contact

Quick Start 7Quick StartThis section details the steps for a quick fixture setup.For more comprehensive information, see Operation, page 45.Install St

8 Desire Series v1.6.0 User ManualConnect (D22 Canopy and Track)For installation and connection information, refer to Desire Series D22 Installation G

Quick Start 9To select a Quick Color:Step 1: Press the [] to access the Presets and Sequences screen.Step 2: Scroll to Quick Color within the Presets

10 Desire Series v1.6.0 User ManualQuick Setups (Studio Daylight and Studio Tungsten)Step 1: On the Main Menu, scroll to Quick Setups.Step 2: Press []

Quick Start 11Studio Quick SetupFrom the home screen:• To adjust the Intensity, press [] or []. The range is 0 to 100%.• To adjust the White Point, pr

12 Desire Series v1.6.0 User Manual

2 Installation and User Interface Overview 13Chapter 2Installation and User Interface OverviewThis chapter contains the following sections:• Specifica

ETC permits the reproduction of materials in this manual only for non-commercial purposes. All other rights are reserved by ETC.ETC intends this docum

14 Desire Series v1.6.0 User ManualSpecificationsPhysical• Rugged die-cast aluminum construction • Hanging yoke standard. Optional yoke and floor stan

2 Installation and User Interface Overview 15Color• Specialized capabilities from different LED array options based on x7 color-mixing expertise:– Viv

16 Desire Series v1.6.0 User ManualTypical Power Consumption (D22)Lustr+Studio DaylightStudio TungstenStudio HD100V 120V 230VIdle Power / Current 7.8W

2 Installation and User Interface Overview 17Typical Power Consumption (D40 and D40XT)VividLustr+FireIceStudio HDStudio DaylightStudio Tungsten100V 12

18 Desire Series v1.6.0 User ManualTypical Power Consumption (D60)Vivid Lustr+FireIceStudio HDStudio DaylightStudio Tungsten100V 120V 240VIdle Power /

2 Installation and User Interface Overview 19Note About LED FixturesAll LED sources experience some lessening of light output and some color shift ove

20 Desire Series v1.6.0 User ManualInstallationMounting HardwareFour options are available for mounting Desire fixtures.• Yoke with C-clamp• Floor sta

2 Installation and User Interface Overview 21Aim AdjustmentD40, D40XT, D60, D22 PortableThe fixture can be tilted up and down and rotated (panned) to

22 Desire Series v1.6.0 User ManualD22 Canopy and TrackThe Portable and Track mounted fixtures can tilted up and down and panned to aim the light wher

2 Installation and User Interface Overview 23Installation ClearancesCooling and Duty CycleDesire D22 and D40 Series fixtures are convection cooled and

Desire Series User Manual iTable of ContentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . 1Quick Setups . . . . . . . . . . . . .

24 Desire Series v1.6.0 User ManualDimensions and Hanging ClearancesUse the following dimensions to allow proper clearances around the fixture. Allow

2 Installation and User Interface Overview 25Safety CableThe safety cable (or other approved safety device) should be attached to the fixture housing

26 Desire Series v1.6.0 User ManualPower and Data Cabling RequirementsPowerThe Desire series fixture operates on AC power, 100 to 240VAC/50-60Hz. The

2 Installation and User Interface Overview 27Data (D22)Portable ModelThe Portable D22 is provided with 5-pin XLR connectors on the back for data in an

28 Desire Series v1.6.0 User ManualConnectionsAll connections and user controls are located on the back of the fixture, depending on the model.Figure-

2 Installation and User Interface Overview 29D40, D60 ConnectionsConnect the AC cable:Align and insert the power connector. Twist the connector clockw

30 Desire Series v1.6.0 User ManualTerminationD40XT – The last fixture on a DMX line must be terminated with a 120 ohm resistor between pins 2 and 3.

2 Installation and User Interface Overview 31DMX ProfileAddressingAddresses must be set between 1 and 510. Each Desire fixture must be considered a se

32 Desire Series v1.6.0 User ManualColor MixesThe following table shows the color mixes for each fixture type.HSI (Hue Saturation Intensity) and HSIC

2 Installation and User Interface Overview 33StudioThe fixture produces only white-type light, which is adjustable from 2700 to 6500K. The Studio prof

ii Desire Series User ManualPower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26Data (D40, D40XT, D60) .

34 Desire Series v1.6.0 User ManualPlus 7Plus 7 adds precision color-control channels to the HSI, HSIC, RGB, and Studio profiles. For example, HSI wit

2 Installation and User Interface Overview 35Studio Daylight and Studio Tungsten ProfilesDirect ControlThe first DMX channel always controls Intensity

36 Desire Series v1.6.0 User ManualDMX Footprints and Channel MappingD22, D40, D40XT and D60 (Studio Tungsten and Daylight)D22 (Lustr+ and Studio HD)C

2 Installation and User Interface Overview 37D40 (Vivid, Lustr+, Fire, Ice, Studio HD)D60 (Vivid, Lustr+, Fire, Ice, Studio HD)* When this feature is

38 Desire Series v1.6.0 User ManualInstalling AccessoriesThe accessory holder is equipped with a spring-loaded retaining clip that prevents secondary

3 Basic Menu Navigation 39Chapter 3Basic Menu NavigationThis chapter contains the following sections:• User Interface Overview . . . . . . . . . . . .

40 Desire Series v1.6.0 User ManualUser Interface OverviewThe Desire Series user interface (UI) consists of an LCD and keypad. All of the basic inform

3 Basic Menu Navigation 41KeypadUse the keypad buttons to access and navigate the menus on the LCD. Figure-3.2 Keypad Buttons.Keypad Lockout The keypa

42 Desire Series v1.6.0 User ManualStatus IndicatorsFigure-3.3 Status Indicators on the Back of the Fixture.The status indicators are three, small, co

3 Basic Menu Navigation 43Status (Home) ScreensThe status (home) screens display when you press [] or when there is no activity for a specific time. T

iiiRoutine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81Menu Flow Chart. . . . . . . . . . . . . . . . . . . .

44 Desire Series v1.6.0 User ManualSystem Message AreaDisplays status messages, which vary depending on the function that is currently active. Master

4 Operation 45Chapter 4OperationThis chapter contains the following sections:• Home Screen Displays . . . . . . . . . . . . . . . . . . . . . . . . .

46 Desire Series v1.6.0 User ManualHome Screen DisplaysDepending on the fixture settings, the following are displayed in the system message area on th

4 Operation 47Fan Control (D60)The fan on D60 fixtures can be forced on via DMX control or by adjusting settings under the Advanced Settings menu. For

48 Desire Series v1.6.0 User ManualMain MenuThe Main Menu can be accessed at any time while viewing other screens by pressing [], then [].DMX Start Ad

4 Operation 49Advanced SettingsThe Advanced Settings menu is for experienced users or for applications that entail very carefully defined performance

50 Desire Series v1.6.0 User ManualAdvanced MenuThe Advanced Menu provides access to various fixture settings and specific operations. The Advanced Me

4 Operation 51DMX ProfileThe current DMX profile is displayed on the DMX Settings menu. You can customize the setting by selecting a different profile

52 Desire Series v1.6.0 User ManualFan Control (D60 only)Fan Control adds another DMX channel of control when set to DMX. Alternate settings are Slow,

4 Operation 53Plus Seven (Vivid, Lustr+, Fire and Ice, Studio HD)Plus Seven allows enhanced color-mixing precision when using the RGB, HSI, HSIC, or S

iv Desire Series User Manual

54 Desire Series v1.6.0 User ManualLED SettingsUse the LED Settings menu to adjust fixture performance. From the LED Settings menu, you can set the fo

4 Operation 55BoostBoost provides the brightest possible output, with least guarantee of consistency. This is best for applications with low duty cycl

56 Desire Series v1.6.0 User ManualLinearLinear has no curve. Brightness levels correlate exactly with the value of the dimming control signal. Modera

4 Operation 57Output FreqOutput Frequency is the frequency in Hz at which the LED array pulses, or blinks, as a function of Pulse-Width Modulation (PW

58 Desire Series v1.6.0 User ManualWhite Point (Vivid, Lustr+, Fire and Ice, Studio HD)White Point controls the appearance (color temperature) of whit

4 Operation 59Presets (Vivid, Lustr+, Fire and Ice, Studio HD)A Preset is a single, static look or color mix. The Desire Series fixtures come with 24

60 Desire Series v1.6.0 User ManualStep 1: On the Presets and Sequences menu, scroll to Presets. Step 2: Press [].Step 3: With Preset selected, press

4 Operation 61Delay Time Delay time is the length of time the fixture waits on the previous setting before initiating the crossfade to the Preset. The

62 Desire Series v1.6.0 User ManualEdit (Studio Daylight and Studio Tungsten)Use Edit to change the brightness and strobe settings of the LED array. T

4 Operation 63Save DMX as PresetYou can take a snapshot of the incoming DMX signal when the fixture is in HSI mode and save it as a preset value.Step

Introduction 1IntroductionCongratulations on your purchase of a Desire Series by ETC product.Desire’s x7 Color System™ seven-hue technology produces a

64 Desire Series v1.6.0 User ManualSequencesA Sequence is a timed series of presets. Up to 12 different Sequences may be altered for Preset selections

4 Operation 65Figure-4.24 Selecting Rate on the Sequences Menu.Step 2: Press [] or [] to set the desired percent.Step 3: Press [].Step 4: Press [] to

66 Desire Series v1.6.0 User ManualFigure-4.26 Selecting Preset on the Sequences Menu.Step 2: Press [] or [] to set the desired Preset number.Step 3:

4 Operation 67Figure-4.28 Setting Sequence End State.Step 1: On the Sequences menu, scroll to Preset and press [].Step 2: With the Preset number selec

68 Desire Series v1.6.0 User ManualQuick Color (Vivid, Lustr+, Fire and Ice, Studio HD)Quick Color allows you to easily select a color and its intensi

4 Operation 69Figure-4.31 XYZ Status Screen Showing Master.SlaveAny fixture in the data chain that is being controlled by the master fixture. By defau

70 Desire Series v1.6.0 User ManualFigure-4.33 Current DMX In Screen with Dynamic Values.Step 3: Press [] or [] to scroll through the channels. Arrows

4 Operation 71TestTest is used to test the fixture and display its output values. Test overrides all other control to the fixture. The action options

72 Desire Series v1.6.0 User ManualFigure-4.36 Test Screen in Individual Control Mode.Step 4: Press []or [] to set the intensity of the series.Step 5:

4 Operation 73• The assigned fixture RDM number and label• The fixture modelFigure-4.38 About Fixture Screen.Step 1: On the Diagnostics screen, scroll

2 Desire Series v1.6.0 User ManualFigure-1.1 Components of a D40 Fixture.Figure-1.2 Components of the Rear Panel. D40 and D60 shown.Figure-1.3 Keypad

74 Desire Series v1.6.0 User ManualBLght time out You can change the length of time the LCD backlight remains on after a UI button has been pressed. T

4 Operation 75OverTemp You can change how an over-temperature situation is indicated in order to control stray light. Visible (Vivid, Lustr+, Fire and

76 Desire Series v1.6.0 User ManualCopy All SettingsWhen DMX is not applied you can copy all settings, except DMX address, globally to all of the othe

4 Operation 77Studio SettingsVivid, Lustr+, Fire and Ice, Studio HDThe Studio profile produces only white light that is adjustable in brightness, whit

78 Desire Series v1.6.0 User ManualStudio DMX ControlWhen controlled via DMX, the first three channels adjust the output in the following order. Chann

4 Operation 79Studio Daylight and Studio TungstenThe Studio profile allows quick adjustment of Intensity. The Studio profile can be operated in a stan

80 Desire Series v1.6.0 User ManualError MessagesWhen a system error is detected, a message displays on the home screen. The message changes to reflec

4 Operation 81Routine MaintenanceTo ensure optimum performance of your Desire series fixture, you should perform the following inspections and cleanin

82 Desire Series v1.6.0 User Manual

5 Menu Flow Chart 83Appendix 5Menu Flow ChartThe following illustrations show each of the menus that are displayed on the Desire fixture LCD and the p

Introduction 3ModelsEach member of the Desire Series product line is unique and optimized for a specific lighting task. All fixtures feature narrow op

84 Desire Series v1.6.0 User ManualHome and Main Menus (Studio Daylight and Studio Tungsten)To Advanced MenuMain MenuDMX Start Address: 001Quick Setu

5 Menu Flow Chart 85Advanced Menu (Vivid, Lustr+, Fire and Ice, Studio HD)Advanced MenuDMX SettingsLED SettingsPresets and SequencesDiagnosticsLocal S

86 Desire Series v1.6.0 User ManualAdvanced Menu (Studio Daylight and Studio Tungsten)Advanced MenuDMX SettingsLED SettingsPresets and SequencesDiagno

5 Menu Flow Chart 87Presets (Vivid, Lustr+, Fire and Ice, Studio HD)Presets and SequencesFocus: OffPresetsSequencesQuick ColorPreset 1 is ActiveNo Seq

88 Desire Series v1.6.0 User ManualPresets Menu (Studio Daylight and Studio Tungsten)Presets and SequencesFocus: OffPresetsSequencesPreset 1 is Active

5 Menu Flow Chart 89Sequences and Quick Color Menus (Vivid, Lustr+, Fire and Ice, Studio HD)If Preset is set to ‘0’SequencesSequence: *3Action: Not A

90 Desire Series v1.6.0 User ManualDiagnostics MenuAbout FixtureRDM: 6574:12345678Ver: 1.4.1.0.0.20 (1)Ser: 000021xxxDesire Vivid 22DMX START: 001RDM

5 Menu Flow Chart 91Diagnostics TestAdvanced MenuDMX SettingsLED SettingsPresets and SequencesDiagnosticsLocal SettingsDiagnosticsCurrent DMX InNetwor

92 Desire Series v1.6.0 User ManualDiagnostics Recalibrate FixtureAdvanced MenuDMX SettingsLED SettingsPresets and SequencesDiagnosticsLocal SettingsD